Now all ORiNOCO Dual-Radio Access Points support mesh with the flip
of a switch!
Recognizing the importance of delivering an enterprise class
feature-rich mesh solution, the industry-leading ORiNOCO Dual Radio
Access Points are available with mesh functionality ensuring a truly
reliable, secure and easy to deploy wireless network.
Add mesh functionality to an existing AP-4000 in your network by
downloading Firmware Version 3.4.
The ORiNOCO AP-4000 Access Point is the flagship solution in Proxim's
next generation line of access points supporting enterprise voice and
video applications. Delivering enterprise-scale security, management and
QoS features, the AP-4000 is mesh capable for best-in-class performance
and flexibility in large enterprise and metropolitan Wi-Fi deployments.
| RADIO |
Dual Radio Access Point with integrated radios: 802.11a + 802.11 b/g |
| DATA RATES SUPPORTED |
802.11b |
1, 2, 5.5, 11 |
| 802.11 g |
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps |
| 802.11a |
6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| NETWORK STANDARD |
IEEE 802.11a IEEE 802.11b or IEEE 802.11g |
| UPLINK |
Autosensing 802.3 10/100BASE-T Ethernet |
| FREQUENCY BAND |
802.11 b/g |
2.412 to 2.462 GHz (FCC) |
| 2.412 to 2.472 GHz (ETSI) |
| 2.412 to 2.484 GHz (TELEC) |
| 802.11a |
5.15 to 5.35 GHz (FCC UNII 1 and UNII 2), 5.725 to 5.85 GHz (FCC UNII3/ISM) |
| 5.15 to 5.35 GHz and 5.47 to 5.725 GHz (ETSI) |
| 5.15 to 5.25 GHz (TELEC) |
| NETWORK ARCHITECTURE TYPE |
Infrastructure |
| WIRELESS MEDIUM |
802.11b or 802.11 g |
Direct sequence spread spectrum (DSSS); Orthogonal Frequency Division Multiplexing (OFDM) |
| 802.11a |
Orthogonal Frequency Division Multiplexing (OFDM) |
| MEDIA ACCESS PROTOCOL |
Carrier sense multiple access with collision avoidance (CSMA/CA) |
| MODULATION |
OFDM |
BPSK @ 6 and 9 Mbps |
| QPSK@ 12 and 18 Mbps |
| 16-QAM@24and 36 Mbps |
| 64-QAM @ 48 and 54 Mbps |
| DSSS |
DBPSK @ 1 Mbps |
| DQPSK @ 2 Mbps |
| CCK@5.5and 11 Mbps |
| OPERATING CHANNEL |
2.4 GHz Band |
802.11b: ETSI: 13; Americas: 11; TELEC (Japan): 14 |
| 802.11g: ETSI: 13; Americas: 11; Japan (TELEC): 14 CCK, 13 OFDM |
| 5 GHz Band |
FCC: 12 ETSI: 19 Japan (TELEC): 4 Singapore: 9 Taiwan: 8 S. Korea: 4 |
| NON-OVERLAPPING CHANNELS |
Fifteen (FCC only) |
| RADIO SPECIFICATIONS RF PERFORMANCE |
The following tables show typical RF performance values
for FCC-certified products (values may differ for products certified in
other regulatory domains) |
|
802.11a RF Performance |
| 802.11a Data Rates (Mbps) |
54 |
48 |
36 |
24 |
18 |
12 |
9 |
6 |
|
|
|
|
| Tx Power (dBm) |
16 |
17 |
18 |
18 |
18 |
18 |
18 |
18 |
|
|
|
|
| Receiver Sensitivity (dBm) |
-70 |
-73 |
-78 |
-82 |
-85 |
-84 |
-86 |
-87 |
|
|
|
|
| Antenna Gain (dBi) |
0 (integrated diversity antennas; 5.15-5.85 GHz) |
| 802.11b/g RF Performance |
| |
G-only Rates B-only Rates |
B-only Rates |
| 802.11b/g Data Rates (Mbps) |
54 |
48 |
36 |
24 |
18 |
12 |
9 |
6 |
11 |
5.5 |
2 |
1 |
| Tx Power (dBm) |
17 |
18 |
18 |
18 |
18 |
18 |
18 |
18 |
20 |
20 |
20 |
20 |
| Receiver Sensitivity (dBm) |
-70 |
-73 |
-79 |
-82 |
-85 |
-88 |
-90 |
-91 |
-89 |
-91 |
-92 |
-93 |
| Antenna Gain (dBi) |
1 (integrated diversity antenna module; 2.4—2.5 GHz |
|
| Safety |
UL 60950 |
| CSA 22.2 No. 60950-00 |
| IEC 60950 3rd Ed (1999) |
| COMPLIANCE STANDARDS |
Radio Approvals |
FCC Part 15.401-15.407 |
| RSS-210 (Canada) |
| Antenna Approvals |
EN301.893 |
| EN300.328 |
| EN301.489-1 |
| EN301.489-17 |
| EN50371 |
| ARIB STD-T71, ARIB-STD 33, ARIB-STD 66 |
| FCC 15.247 RSS-210 |
| EMI and Susceptibility (Class B) |
FCC Part 15.107 ICES-003 (Canada) |
| Security |
802.1X and TKIP |
| WPA |
| AES and 802.11 i ready |
| Network Standard |
IEEE 802.11b |
| IEEE 802.11g |
| IEEE 802.11a |
| Other |
FCC Bulletin OET-65C |
| Wi-Fi Alliance Certification |
| RSS-102 |
| IEEE 802.3af |
| SNMP COMPLIANCE |
ORiNOCO; rfc1213; rfc1643; SNMPv2c; 802.11i-D3; IANAifType-MIB; MIB802 |
| ANTENNA |
2.4 GHz |
| Dual on-boardantennas to support antenna and polarization diversity: |
| |
One 3dBi vertically polarized omni antenna, 360 º horizontal and 40º vertical beam widths |
| One 2dBi horizontally polarized omni antenna, 360º horizontal and 30º vertical beam widths |
| Certified with |
Proxim 1086-REA |
| Proxim 1086-DA24-4 |
| Proxim 1086-OA24-5 |
| Proxim 1086-PA24-8.5 |
| Proxim 1086-PA24-9.5 |
| 5 GHz |
| Dual on-board antennas to support antenna and polarization diversity: |
| |
One 3dBi vertically polarized omni antenna, 360º horizontal and 40º vertical beam widths |
| |
One 2dBi horizontally polarized omni antenna, 360º horizontal and
30º vertical beam widths |
| Certified with |
Proxim 1086-REA Proxim 1086-PA50-7 |
| 2.4 and 5 GHz |
| Dual band (2.4 and 5GHz) external Range Extender Antenna for optimum antenna placement, 1086-REA |
| SECURITY ARCHITECTURE CLIENT AUTHENTICATION |
Authentication |
802.1X support including PEAP, EAP-TLS, EAP-TTLS EAP-SIM, and other
EAP methods that conform to RFC 3748 to yield mutual authentication and
dynamic per-user, per-session encryption keys |
| RADIUS-based MAC address |
| MAC address control list |
| Encryption |
802.11 i support for CCMP/AES keys of 128 bits (WPA2) |
| TKIP encryption enhancements (for WEP) with key hashing (per-packet keying) and broadcast key rotation (WPA) |
| Support for WEP keys of 64 and 128 bits |
| Message Authentication: |
802.11 i AES message authentication with 128 bit keys |
| TKIP with 128 bit Michael Message Integrity Check |
| INTRUSION DETECTION |
Rogue AP and client detection |
| Detect switch port of rogue access point when used in conjunction with Wavelink Mobile Manager |
| Detect MIC intrusion attacks |
| STATUS LEDS |
Four indicators on the top panel indicate power, wireless traffic, Ethernet traffic, and error conditions |
| REMOTE CONFIGURATION SUPPORT |
DHCP, Telnet, HTTP, TFTP, Boot P, and SNMP |
| LOCAL CONFIGURATION |
RS-232 Serial port, DB9 Female |
| DIMENSIONS |
Packaged |
289 mm x 235 mm x 70 mm |
| Unpackaged |
198 mm x 121 mm x 25 mm |
| WEIGHT |
Packaged weight |
0.92 kg |
| Unpackaged weight |
0.29 kg AP-only, 0.20 kg for power supply |
| ENVIRONMENTAL |
Operating |
0º to 55ºC, 5-95% humidity non-condensing @ 5º to 55ºC |
| Storage |
-20º to 85ºC, 5-95% humidity non-condensing @ 5º to 85ºC |
| PROCESSOR |
220MHz MIPS 4000 processor |
| SYSTEM MEMORY |
16 Mbytes RAM |
| 8 Mbytes FLASH |
| INPUT POWER |
90 to 240 VAC ±10% (power supply) |
| REQUIREMENTS |
48 VDC ±10% (device) |
| POWER DRAW |
10 watts, RMS |
| WARRANTY |
One year |
| WI-FI CERTIFICATION |
View Wi-Fi Interoperability Certificate for ORiNOCO AP-4000 |
| PART NUMBERS |
8670-US |
ORiNOCO AP-4000 US FCC-MU; with Middle and Upper Bands only for
802.11a, includes external antenna connectors for 802.11a and 802.11 b/g for FCC
countries |
| 8670-US2 |
ORiNOCO AP-4000 US FCC-LMU; with Lower, Middle and Upper Bands for
802.11a (no antenna connector for 802.11 a) for FCC countries |
| 8670-EU |
ORiNOCO AP-4000 EU ETS-L; with Lower Band only for 802.11a,
includes external antenna connectors for 802.11a and 802.11 b/g |
| 8670-EU2 |
ORiNOCO AP-4000 EU ETS- with Lower and Middle Bands for 802.11a,
includes external antenna connectors for 802.11 b/g and 802.11a;certified for
Finland, Germany and Netherlands only |
|
Customers are responsible for verifying approval for use
in their country. Not all regulatory domains have been approved |
To achieve 802.11 i security, the EAP method that is used must conform to
both RFC 3748 and IETF draft-walker-ieee802-req-07 (Submitted as an
Informational RFC). In RFC 3748, EAP- MD5-Challenge (Section 5.4), One-Time
Password (Section 5.5) and Generic Token Card (Section 5.6), are non-compliant
with the requirements specified in IETF draft-walker-ieee802-req-07 and thus do
not support the 802.11i security claims when used with 802.11i.
